Specification & Dimension of Hi-Flow Filter cartridge/KTMT Filter
Introduction:
The Hi-Flow Filter cartridge is
a new product of water filter cartridge. It has a 6 inch/152mm large diameter,
and is coreless, single open-ended with an inside to outside flow pattern. The
large diameter with big filter area can reduce the number of filter cartridges
and the dimension of housing required. The end cap and the filter layer are
made of hot soldering, there is no adhesive, so there is a wide range of
chemical compatibility, can be applied in many fields. Besides, the long
service life and high flow rate result in low investment and less manpower cost
in many applications.
Specification:
|
Outside
Diameter: |
6 inch(152mm) |
|
Length:
|
20 inch(508mm),40 inch(1016mm),60 inch(1524mm) |
|
Filter media: |
Pleated glass
fiber |
|
Support/Drainage: |
Polypropylene (PP) |
|
End caps
: |
Glass fiber reinforced Polypropylene |
|
Seal
Material : |
EPDM, NBR |
|
Removal
Rating: |
1 µm , 4.5 µm ,
6 µm , 10 µm ,20 µm ,40 µm ,70 µm,100µm |
|
Maximum
Operating Temperature: |
Pleated glass
fiber:121°C Pleated PP: 82°C Melt Blown PP: 65°C |
|
Maximum
Differential Pressure: |
Pleated glass fiber:3.4
4Bar at 121°C Pleated PP: 3.44Bar at
82°C Melt Blown:1.03Bar at
65°C |
|
Recommended
Change out Differential Pressure: |
2.5Bar at 20°C |
|
Suggested
maximum Flow of water: |
20 inch length: 660LPM
40 inch length: 1,300LPM 60 inch length: 1,900LPM |
Application:
1) Pre-filtration of RO system
2) Pre-purification treatment of all kinds of industrial water
3) General industries: pre-treatment of all kinds of process liquid, condensed
water, cooling water, and waste water
4) Food and beverage industries: drinking water, wine, high Fructose,
edible oil, soft drinks, and milk
5) Chemical and petrochemical industries: all kinds of acids, alkalis,
solvents, quench water, salt water and other chemical drugs
6) Power plant: fill water, condensation water
Features:
-- Gradient pore structure
-- The maximum size of the filter system can be
reduced by 50%
-- Up to 110M3/H flow rate per filter cartridge
for water filtration.
-- Maximum 50% reduction of filter system
-- 20 inch /528mm,40inch/1022mm and 60
inch/1538mm lengths are available
-- All contaminants can be removed within the
cartridge due to the flow direction.