Paramtents
Stabilized Salt Rejection % 99%
Minimum salt rejection % 98%
Testing pressure 150pai(1.03Mpa)
Max Feed water temperature: 45℃
Maximum operating pressure 600psi(2.07Mpa)
Maximum pressure drop 15psi(0.1Mpa)
Packging & Delivery
Min Order10 piece
Briefing
Detailed
Introduction:
RO, for Reverse Osmosis in English, is to spend hundreds of millions of dollars and after years of carefully developed in high-tech water procession technology. Generally, the reverse osmosis membrane is 6"/152mm
in diameter, and there is no central support frame,open end, filtering way of fluid flow from the inside out. Filter design of large diameter increases the effective filter area can greatly reduce the amount of filter and decrease the size of the shell. Because of its large flow, filtering long life, in many applications can reduce investment and manpower cost
RO membrane commonly specifications in KTMT | |||||
Dimension | Length | 20''(528mm), 40''(1022mm) , 60''(1538mm) | |||
Micron ratings | 1um,4.5um,6um,10um,20um,40um,70um,100um | ||||
OD | 6'' (152mm) | ||||
Capability | Stabilized Salt Rejection % | 98 | 99 | 99 | |
Minimum salt rejection % | 98 | 99 | 99 | ||
Average Permeate flow GPD(m³/d) | 2800(10.6) | 2400(9.1) | 1900(7.2) | ||
Active Membrane Area ft2(m2) | 85(7.9) | 85(7.9) | 85(7.9) | ||
Testing Conditions | Testing pressure | 150pai(1.03Mpa) | |||
Temperature of Testing Solution | 25°C | ||||
Concentration of Testing Solution (NaCl) | 1500ppm | ||||
ph value of Test solution | 8 | ||||
Recovery of Single membrane element | 0 | ||||
Extreme conditions of usage | Maximum operating pressure | 600psi(2.07Mpa) | |||
Maximum temperature water inflow | 45°C | ||||
Maximum water inflow SDI | 5 | ||||
Influent concentration of free chlorine | <0.1ppm | ||||
Influent pH range with continuous operation | 3~10 | ||||
Water ph range of chemical cleaning | 2~12 | ||||
Maximum pressure drop | 15psi(0.1Mpa) |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.